Main Chassis Unit - OKIDATA OKIPAGE 16n Service Manual

3.3.17 Main chassis unit

(1) Turn the AC power switch off. Unplug the AC power cord from the outlet.
(2) Remove the rear cover (see 3.3.1).
(3) Remove the contact Assembly (see 3.3.2).
(4) Remove the side cover (R) (see 3.3.5).
(5) Remove the side plate (R) (see 3.3.6 (1) to (6)).
(6) Remove the stacker cover Assembly (see 3.3.7).
(7) Remove the front feeder roller Assembly (see 3.3.12, (1) to (3)).
At this time, it is not required to remove the manual feed hopper Assembly.
(8) Remove the earth plate (HP).
(9) Lift gear (TR) 1 to unlock it. Remove gear (TR) 1 and transfer roller 2. (At this time, two
bearings (TR) 3 and two transfer springs 4 are also removed.)
Do not lose bearings or springs.
(10) Remove connector cover 5 in direction of arrow and then remove four connectors 6 and
7 .
(11) Remove the DC Fan motor.
(12) Remove eight screws = and then remove main chassis unit A.
Parts Replacement 3 - 26
Service Manual, P/N 59274401
OKIPAGE 16n