Agria 3600 Operating Instructions Manual page 8

Assembly Instructions
Steering handle
Drive-wheel 4.00-8
Wheel weights
Mounting drive-wheels:
– 4.00-8: Mount drive-wheels on wheel flanges us-
ing wheel screws and washers. Mount in such a way
that the arrow tread profile points in travel direction.
– 4.00-10: Screw wheel adapter flanges onto drive-wheels. Then mount drive-
wheels onto wheel flanges using wheel screws and washers in such a way
that the arrow tread profile points in travel direction.
Assembly of fast speed shifter:
Push shifter upwards through shifter guide ring (I), screw on ball handle (II),
stick shifter onto gearbox shift lever (III) and secure with spring band (IV).
I
8
Set screw and
hexagonal nut
Drive-wheels 4.00-10 with
wheel adapter flange
II
agria Two-wheel tractor 3600
Version 3F2R,
differential, steering brake
III
Arrangement of
Bowden cables
IV