INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly
to make some comfort adjustments. Figure 8 details those parts of the power chair that are designed to be disassembled and
assembled by an end user or by a qualified caregiver before using the product or making comfort adjustments. There are two
hex keys provided for use with controller installation and adjustment, and foot platform adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores
or through your authorized Pride Provider.
ARMREST WIDTH
ADJUSTMENT
Figure 8. Select Traveller Assembly View
20
I V .
CONTROLLER
POSITION
www.pridemobility.com
A S S E M B L Y
SEAT HEIGHT
ADJUSTMENT
FOOT PLATFORM
DEPTH ADJUSTMENT
SEAT INSTALLATION
BATTERY COVER
BATTERIES
Select Traveller