Advertisement
V I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the PMV into several pieces: the seat, the PMV base, the basket, the batteries, and
the battery shroud. See figure 19. No tools are required to disassemble or assemble your PMV, but keep
in mind that the disassembled sections of the PMV take up more floor space than the assembled unit.
Always disassemble or assemble your PMV on a level, dry surface with sufficient room for you to work
and move around your PMV—about 5 feet (1.5 meters) in all directions. Remember that some PMV
components are heavy and you may need assistance when lifting them.
WARNING! Do not lift beyond your physical capability. Ask for assistance when
necessary while disassembling or assembling your PMV.
IDENTIFICATION KEY
1. SEAT
2. PMV BASE
3. BASKET
4. BATTERIES
5. BATTERY SHROUD
Figure 19. Disassembled PMV
1. Remove the seat by lifting it straight up and off of the PMV. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
2. Remove the battery shroud from the PMV. See figure 11.
3. Disconnect the battery tie-down straps.
4. Disconnect all battery harnesses from the battery terminals by sliding back the terminal boots and
unscrewing the nuts from the bolts. See figures 12 and 13.
5. Remove the batteries from the battery wells.
ASSEMBLY
1. Reinstall the batteries to the battery wells.
2. Connect the battery harnesses. See figures 12 and 13.
3. Secure the battery tie-down straps.
4. Reinstall the battery shroud.
5. Reinstall the seat and rotate it into place.
PMV Series
1
2
3
4
5
27
Advertisement
