Setting Up A Usb Driver In Windows Xp - Motorola SURFBOARD SBV4200 User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Setting Up a USB Driver in Windows XP

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.
1
Be sure "Install the software automatically" is selected.
2
Click Next. Windows automatically searches for the correct USB drivers and installs
them. If the installation is successful, the window at bottom left is displayed.
3
Click Finish to complete the installation. Otherwise, be sure the SURFboard VoIP
Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.
When you finish setting up the USB driver, you can continue with
on page 22.
X
Exit
Troubleshooting
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.
®
21 SURFboard SBV4200 VoIP Cable Modem User Guide
FAQ Glossary License
"Configuring TCP/IP"