Setting Up A Usb Driver In Windows Xp - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Setting Up a USB Driver in Windows XP

Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
1
Be sure "Install the software automatically" is selected.
2
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.
3
Click Finish to complete the installation. Otherwise, be sure the Motorola SBG1000 Wireless Cable Modem
Gateway CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
X
108
Exit
FAQ Specifications Glossary License
"Configuring TCP/IP"
SBG1000 Wireless Cable Modem Gateway User Guide
on page 57.