Setting Up A Usb Driver In Windows Xp - Motorola SB5100 Series User Manual

Introduction Before You Begin
Home Print
Installation & Configuration

Setting Up a USB Driver in Windows XP

Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.
1
Be sure "Install the software automatically" is selected.
2
Click Next. Windows automatically searches for the correct USB drivers and installs
them. If the installation is successful, the window at bottom left is displayed.
3
Click Finish to complete the installation. Otherwise, be sure the SURFboard Cable
Modem CD-ROM is correctly inserted in your CD-ROM drive.
When you finish setting up the USB driver, you can continue with
Windows XP"
.
X
Exit
Troubleshooting
on page 30.
Although your SURFboard cable modem model number may
be different than in the images in this guide, the procedure is
the same.
21
SB5100 Series Cable Modem User Guide
FAQ Glossary License
"Configuring TCP/IP in