Before You Begin - Motorola SURFBOARD SBV4200 User Manual

Introduction

Before You Begin

Caution
To comply with all national safety
regulations, do not route the USB,
Ethernet, or telephone cables
outside of the building.
Home Print
Installation & Configuration
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard VoIP cable modem:
Item
Power adapter
or cable
10/100Base-T
Ethernet cable
USB cable
SURFboard VoIP
Cable Modem
CD-ROM
You will need 75-ohm
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
the VoIP cable modem. The coaxial cable and RF splitter are available at consumer
electronic stores.
X
Exit
Troubleshooting
Description
The SBV4200 is supplied with one of the following
powering options:
I
A power adapter to connect to the power outlet
I
A power cable to connect to an
Connects to the
Connects to the
Contains the User Guide and USB drivers
coaxial cable with F-type connectors
splitter and two additional coaxial cables to use both the TV and
®
4 SURFboard SBV4200 VoIP Cable Modem User Guide
FAQ Glossary License
UPS
Ethernet port
USB port
to connect your VoIP cable