Installation And Configuration Overview - Motorola SURFBOARD SBV4200 User Manual

Introduction Before You Begin
To connect a single PC running Microsoft Windows
to a SURFboard VoIP cable modem, we
recommend using the Installation Assistant
application.
You can start the Installation Assistant from the
Main Menu on the SURFboard VoIP Cable Modem
CD-ROM. In most cases, the Installation Assistant
automatically configures your VoIP cable modem.
Home Print
Installation & Configuration

Installation and Configuration Overview

To install and configure your VoIP cable modem for a single PC running
Microsoft Windows, you can use the Installation Assistant.
Otherwise, to install and configure your VoIP cable modem:
1
Install the cables as described in one of:
I
I
2
If you are using the
Ethernet users can skip this step.
3
Configure
I
I
X
Exit
Troubleshooting
"Cabling and Startup for a Single User"
"Cabling for Multiple Users" on page 39
USB port only, go to
TCP/IP and verify the IP address
"Configuring TCP/IP" on page 22
Your Macintosh or UNIX user manual
8 SURFboard
FAQ Glossary
on page 9
"Setting Up a USB Driver"
for your computer following one of:
®
SBV4200 VoIP Cable Modem User Guide
License
on page 11.