Overheat Protection - Miele CS 1112 Operating And Installation Instructions

Use

Overheat protection

Each cooking zone is equipped with a
temperature limiter. This feature
automatically turns off the heating
element before the glass ceramic
becomes too hot. Once the ceramic
surface has cooled to a safe
temperature the heating element will
automatically turn back on.
The overheat protection may be
activated by:
– turning on a burner without putting a
pan on it.
– heating an empty pan.
– an uneven pan not sitting evenly on
the burner.
– the pan not conducting heat
properly.
If the heating elements cycle on and
off, even at the highest setting, the
overheating protection has been
activated.
14