Step 4 - Attach Hotshoe - Ikelite 6843.72 Instruction Manual

Step 4 - Attach Hotshoe

When connecting an external strobe to the housing bulkhead, slide the
hotshoe into the top camera mount until it stops. Hotshoe must be all the
way forward in the camera mount to assure a good electrical connection
with a strobe, Diagram C, below.
Turn Hotshoe Rotary Lock at hotshoe base clockwise to tighten to camera
mount.
Make sure hotshoe cord does not interfere with controls or the housing back
when closing the housing.
Diagram C
Hotshoe - push all the
way forward into the
camera mount
Push Camera and
Mounting Tray all
the way forward into
Mounting Plate
Wi Fi
Mounting Plate
Hotshoe
Rotary
Lock
13