Table of Contents
Advertisement
RECOMMENDED ACCESSORIES and ATTACHMENTS
4077.02 Right-Hand Quick Release Handle with Extension
The optional right-handed release handle with
tray mount comes with the necessary hardware to
mount to your Ikelite housing tray.
The Extension attaches to an existing Base with
two included screws for stability and rotation-free
use.
Attach Base + Release Handle(s) to Housing
1. Place the housing
upside down on a flat
surface or in your lap,
so that the housing
port is facing toward
you as shown.
2. Line up the 2 triangular
shaped holes with the
housing mounts. If
the tray is positioned
properly, the handle
will be on your left side
facing down.
3. Insert and tighten both
1/4-20 x 3/8" screws
with nylon washers.
4. Finish tightening the tray to the housing using a flathead screwdriver. DO
NOT overtighten.
23
Advertisement
Table of Contents
Troubleshooting
