wsm RTV900 Workshop Manual page 68

RTV900, WSM
Valve Guide Replacing Tool
Application: Use to press out and press fit the valve guide.
A 20 mm dia. (0.79 in. dia.)
B 9.96 to 9.98 mm dia. (0.3921 to 0.3929 in. dia.)
C 5.5 to 5.7 mm dia. (0.2165 to 0.2244 in. dia.)
D 200 mm (8.66 in.)
E 80 mm (3.15 in.)
F 40 mm (1.58 in.)
G 25 mm dia. (0.98 in. dia.)
H 5 mm (0.197 in.)
I 6.0 to 6.1 mm dia. (0.236 to 0.240 in. dia.)
J 18 mm dia. (0.71 in. dia.)
K 10.6 to 10.7 mm dia. (0.417 to 0.421 in. dia.)
L 6.9 to 7.1 mm (0.272 to 0.280 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
Bushing Replacing Tools
Application: Use to press out and press fit the bushing.
For small end bushing
A 145 mm (5.71 in.)
B 20 mm (0.79 in.)
C 100 mm (3.94 in.)
D 19.90 to 19.95 mm dia. (0.7835 to 0.7854 in. dia.)
E 21.90 to 21.95 mm dia. (0.8622 to 0.8642 in. dia.)
F 25 mm dia. (0.79 in. dia.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
6.3 μm (250 μin.)
a
6.3 μm (250 μin.)
b
Flywheel Stopper
Application: Use to loosen and tighten the flywheel screw.
A 200 mm (7.87 in.)
B 30 mm (1.18 in.)
C 20 mm (0.79 in.)
D 15 mm (0.59 in.)
E 8 mm (0.31 in.)
F 10 mm dia. (0.39 in. dia.)
G-52
G GENERAL
W1234567
W12358870
W1472583
KiSC issued 03, 2008 A