Tightening Torques - wsm RTV900 Workshop Manual

RTV900, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-11.)
Front axle slotted nut
Front wheel mounting screw
Tie-rod end slotted nut
Ball joint mounting and nut
Knuckle case mounting bolt and slotted nut
Strut mounting nut
Front case cover mounting screw
Lower arm mounting bolt and nut
Front differential case mounting nut
Knuckle case cover mounting screw
Bevel gear UBS screw
Item N·m
150
75.0 to 90.2
39.2
48.1 to 55.8
39.2
48.1 to 55.8
17.7 to 20.6
102.9 to 117.6
39.3 to 44.1
48.1 to 55.8
29.4 to 34.3
5-S3
FRONT AXLE
kgf·m lbf·ft
15.3 110.6
7.6 to 9.2 55.3 to 66.5
4.0 29.0
4.9 to 5.7 35.5 to 41.2
4.0 29.0
4.9 to 5.7 35.5 to 41.2
1.8 to 2.1 13.3 to 15.5
10.5 to 12.0 75.9 to 86.7
4.0 to 4.5 29.0 to 32.5
4.9 to 5.7 35.5 to 41.2
3.0 to 3.5 21.7 to 25.3
KiSC issued 03, 2008 A
W1012736