Installing The Sim Card - FIFOTRACK A300 User Manual

A300 USER GUIDE
external power supply, charging device at least 2 hours, 3 hours is suggested. Before installation,
ensure all of the parameters setting and test are finished.

8.2 Installing the SIM Card

Device can't support 3G or 4G network. Make sure the SIM card supports 2G.

Ensure the SIM card has enough balance.

Ensure PIN code has been closed.

Authorization SOS numbers can't work well if SIM card doesn't have caller ID service. E.g.:

device can't reply SMS to authorization SOS number because SIM card can't identify incoming
call.
SIM card should have GPRS function for platform tracking.

Turn off device before SIM card installation.

Copyright © fifotrack 2015 All rights reserved
Screw off and open the front cover
Insert SIM card into SIM card slot
Make sure the chip is facing to PCB.
Pay attention to the cutaway angle
direction of SIM card.
Close front cover and lock the screw
10