First Use; Charging; Installing The Sim Card - FIFOTRACK A100 User Manual

A100 USER GUIDE
Sensor
GSM Frequency
Band
GPS Sensitivity
GPS Start Speed
Position Accuracy
I/O Port

8 First Use

8.1 Charging

First time use A100, please connect positive wire(+ Red) and ground wire(-black) to 12V or 24V
external power supply, charging device at least 2 hours, 3 hours is suggested. Before installation,
ensure all of the parameters setting and test are finished.

8.2 Installing the SIM Card

Device can't support 3G or 4G network. Make sure the SIM card supports 2G.

Ensure the SIM card has enough balance.

Ensure PIN code has been closed.

Authorization SOS numbers can't work well if SIM card doesn't have caller ID service. E.g.:

device can't reply SMS to authorization SOS number because SIM card can't identify incoming
call.
SIM card should have GPRS function for platform tracking.

Turn off device before SIM card installation.

Copyright © fifotrack 2015 All rights reserved
3D Accelerator Sensor
GSM 850/900/1800/1900MHz
-161dBm
Cold start 35s
Hot start 1s
10m
3 Digital inputs - 1 negative input, 1 positive input, 1 custom input
(Default positive input)
1 Analog input, voltage range is 0-12V
2 Output
1 Microphone port
1 Speaker port
1 USB port
9