Motorola QIP6200/QIP64xx User Manual page 27

•
RF Output – SDTV
If your TV has an RF input only, connect it to the RF output on the
set-top. The TV must be tuned to channel 3 or 4.
The IEEE 1394 is a video and audio connection, so no audio
connections are required if you are using the IEEE 1394
connection and you plan to use your TV's speakers as the primary
audio source.
If You Have:
HDTV only
HDTV and
HD VCR
HDTV and A/V
Receiver
Stereo TV only
Stereo TV and
Stereo VCR
Stereo TV,
Stereo VCR, and
A/V Receiver
Follow:
Connecting Your Set-Top to an HDTV – Video Only
Connecting Your Set-Top to an HDTV – Audio Only
If you have a high-definition VCR, follow the connection
instructions that accompany the HD VCR. The
connections
will be similar to "Connecting Your Set-Top to
a Stereo TV and Stereo VCR."
Connecting Your Set-Top to an HDTV – Video Only
Connecting Your Set-Top to an AV Receiver – Audio Only
Connecting Your Set-Top to a Stereo TV
Connecting your Set-Top to a Stereo TV and Stereo VCR
Connecting your Set-Top to an A/V Receiver, TV, and VCR
QIP6200/QIP64xx User Guide
21
VCR