Sets the aspect ratio. The front panel display indicates the
type you select. The default is 16:9.
Options are 16:9 for wide screen TVs, or 4:3 LETTERBOX
or 4:3 PAN/SCAN for standard TVs:
4:3 LETTERBOX fits wide screen programming on the
screen by placing black bars at the top and bottom.
4:3 PAN/SCAN fills the screen by cropping the left and
right edges of wide screen programming.
Sets the video display format for the component video
outputs. The front panel display indicates the format you
select. Options are 1080i, 720p, 480p, or 480i. The default is
Some TVs support preferred display formats only. Check the
TV's user manual for more information about your TV's
supported display formats.
If you are not using a high-definition television with the
QIP6xxx , selecting a format other than 480i causes the
on-screen display to go blank. If this occurs, you can view
the settings on the front panel display to change the YPbPr
OUTPUT back to 480i.
If you are not using the HDMI video connection, the
HDMI/YPbPr OUTPUT setting displays as YPbPr OUTPUT.