Motorola DCT6400 Series User Manual page 40

Problem Possible Solution
There is no audio Verify that the
when viewing cable control has not been pressed. Press
channels control to restore sound.
If the DCT* audio output is connected to the TV, verify
that the
If the DCT* audio output is connected to a home theater
receiver, verify that the receiver is set to the appropriate
input source and the mute button on the receiver has not
been pressed.
Verify that you have the correct cables for the audio
ports.
Verify that the audio cables are firmly connected
between the DCT* and the audio playback device (TV,
receiver, DVD player, etc.).
There is no audio Not all Dolby Digital
from the center sound. In some cases, the programs may only contain
left and right stereo audio.
and/or surround
speakers of a home
Verify that the SPDIF cable (coaxial or optical) is firmly
theater receiver
connected to the DCT* and the home theater receiver.
connected to the
DCT*
Verify that the home theater receiver is set to a surround
sound audio mode (Dolby Digital, Dolby Pro Logic II
Dolby Pro Logic
Verify that the receiver is properly configured to work
with all connected speakers.
DCT6400 Series User Guide
button on the DCT* or the remote
MUTE
button on the TV has not been pressed.
MUTE
®
programs feature full 5.1 surround
®
).
33
on the remote
MUTE
®
,