Advertisement
OLYMPIC COMBINATION BENCH
STRENGTH TRAINING SYSTEM
INSTRUCTION MANUAL
MODEL : F609
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have questions,
or find missing or damaged parts, we will guarantee your complete satisfaction through our authorized
dealer service centers or our home office customer service department. Please call your local dealer
for assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained technicians will provide
immediate assistance to you, free of charge.
We stand behind our products. Every piece, every part of this BODYCRAFT strength training system
is guaranteed for as long as you own it. We will repair or replace anything that goes wrong.
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
79500
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BodyCraft F609
Summary of Contents for BodyCraft F609
-
Page 1: Instruction Manual
We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is guaranteed for as long as you own it. We will repair or replace anything that goes wrong. -
Page 2: Before You Begin
Olympic Combination Bench. Keep this manual for future reference. If you have additional questions, please call your local BODYCRAFT dealer or our customer service department at 800-990-5556 Monday through Friday, 9 a.m. until 5 p.m. Eastern Time. - Page 4 PARTS CHART NO. DESCRIPTION QTY. FRONT STABILIZER LEG EXTENSION / CURL SLEEVE SEAT SUPPORT UPRIGHT CONNECTOR RIGHT UPRIGHT LEFT UPRIGHT SEAT SLIDER SEAT HINGE BACK SUPPORT BACK SUPPORT PLATE LEG EXTENSION HOLDER LEG EXTENSION SAFETY ARM BAR CATCH FOAM ROLLER HOLDER BACKING PLATE U PIN LEG EXTENSION AXLE...
- Page 5 STEP 1 Assembly Instructions Do NOT tighten bolts until instructed. 1. Attach Leg Extension Sleeve (2) to Front Stabilizer (1) using two 1/2" X 4" Hex Bolts (41), four 1/2" Washers(51) and, two 1/2" Nylon Nuts (49). Attach two 45mm X 75 mm Caps(19) to Front Stabilizer (1).
- Page 6 STEP 2 Assembly Instructions 1. Attach Leg Extension (12) onto Leg Extension Sleeve (11) using Axle (18), two 5/16 Washers (53), two Spring Washers (55) and two 5/16" X 5/8" Round Bolts (46). Attach three 50mm square Plugs (22) to Leg Extension (12). Insert Leg Extension Holder (11) into Leg Extension Sleeve (2) by pulling pre-installed Pop Pin (28) out.
- Page 7 Make certain all bolts are tightened securely. Enjoy many years of a Fit Lifestyle. Thank you for purchasing the Bodycraft Olympic combination bench Machine Training System. If You have any questions, please call your local BodyCraft dealer or call our customer service department at 800-990-5556...
Need help?
Do you have a question about the F609 and is the answer not in the manual?
Questions and answers