Cargo Box - Arctic Cat plowler HDX 2013 Operator's Manual

Cargo Box

The cargo box on this ROV can be con-
verted to a "flat-bed" cargo platform. To
convert your cargo box to a flat-bed, use
the following procedure.
1. Remove all cargo from the box; then
remove the left and right forward tie
bolts.
2. Raise the cargo box; then loosen the
four retaining bolts securing the side
panels in the stake pockets; then
lower the box.
28
HDX188
3. Open the tailgate and remove the
machine screws securing the stop-
cables to the tailgate. Note the correct
orientation of the bushings to the
cable ends and tailgate.
4. Lift off the left and right cargo box
panels; then remove the tailgate from
the cargo bed.
HDX111A
HDX112A
HDX113A
HDX114A
HDX117
HDX115A