Arctic Cat plowler HDX 2013 Operator's Manual page 31

5. Remove the stake pocket retaining
bolts, jam nuts, and forward tie bolt
clip nuts and secure in a safe place
with the machine screws and bush-
ings from the tailgate.
To convert flat-bed to cargo box, use the
following procedure.
1. Set the tailgate into position in the
cargo bed; then lift the cargo bed
making sure the tailgate clears any
receiver hitch attachments.
2. Install the stake pocket retaining bolts
and jam nuts leaving clearance to
install side panel stakes.
3. Set the left and right cargo box side
panels into place on the cargo bed
engaging the stakes into the side
pockets.
4. Install the left and right side clip nuts
onto the frame; then install and
tighten the forward tie bolts securely.
HDX116A
5. Tighten the four stake pocket retain-
ing bolts to 25 ft-lb making sure the
cargo box side panels are resting
firmly on the cargo bed; then tighten
the jam-nuts to 15 ft-lb. Lower the
cargo box.
HDX117A
HDX118A
HDX121
HDX116A
HDX112A
HDX113A
29