GB
5
INSTALLATION
The installation must be executed by a professional.
Lifting instructions
The power supply should be lifted by means of its lifting
eye. The handle is only intended for pulling it along the
ground.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user's responsibility to take adequate precautions.
IMPORTANT
Place the welding power source in a suitable place and make sure the welding
S
rectifier is not covered or set--up so that cooling is prevented.
Make sure the welding rectifier is connected to the correct mains voltage.
S
Earth according to applicable directives.
Connect the power supply lead using the appropriate fuse in conformance with
S
local regulations.
Power supply lead complies to Swedish electrical regulations.
5.1
Assembly of components
ba32d12e
- - 34 - -