Advertisement
GB
1
DIRECTIVE
ESAB Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guarantee that welding
power source LAW 420/520 -- 420/520W from serial number 912 complies with standard IEC/EN
60974--1, in accordance with the requirements of directive (73/23/EEC) and addendum (93/68/EEC)
and with standard EN 50199 in accordance with the requirements of directive (89/336/EEC) and add-
endum (93/68/EEC).
--------------------------------------------------------------------------------------------------------------------------------------
Laxå 1999--04--22
Paul Karlsson
Managing Director
Esab Welding Equipment AB
695 81 LAXÅ
SWEDEN
2
SAFETY
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER'S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS' HAZARD DATA.
ELECTRIC SHOCK - - Can kill
Install and earth the welding unit in accordance with applicable standards.
S
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
Insulate yourself from earth and the workpiece.
S
Ensure your working stance is safe.
S
FUMES AND GASES - - Can be dangerous to health
Keep your head out of the fumes.
S
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
S
and the general area.
ARC RAYS - - Can injure eyes and burn skin.
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
S
clothing.
Protect bystanders with suitable screens or curtains.
S
FIRE HAZARD
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
S
NOISE - - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection.
S
Warn bystanders of the risk.
S
MALFUNCTION - - Call for expert assistance in the event of malfunction.
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
3
INTRODUCTION
The LAW 420, 420W, 520 and 520W are 6--pulse thyristor rectifiers designed for
semi--automatic welding.
Both rectifiers are fan--cooled and equipped with thermal overload protection.
ba32d12e
DECLARATION OF CONFORMITY
Tel: + 46 584 81000
WARNING
PROTECT YOURSELF AND OTHERS!
- - 32 - -
Fax: + 46 584 12336
Hide quick links:
Advertisement
