Setup Menu Operations - Sony PDW-F30 Operating Instructions Manual

INTERFACE SELECT [Interface]: Settings related to
interfaces
NETWORK ENABLE [> Network En]: Select the positions of
the remote control switch which enable access to the
network.
WIRELESS RMT [> Wireless]: Enable or disable operation
from the wireless remote commander.
METADATA [Metadata]: Metadata settings
INDEX POSITION [> Index Pos]: Specify which frame to use
as the thumbnail image (index picture) when recording.
STORE OWNER [> Ownership]: Create UMID owner
information.
DATA ITEM OUT [> DATA ITEM]: Specify whether to include
the information from extracted VANC packets in data
items.
SETUP BANK OPERATION [Setup Bank]: Settings related
to menu bank operations
Menu bank: This unit allows three different complete sets of menu settings to be saved in what are termed "menu banks"
numbered 1 to 3.
RECALL BANK 1 [> Recall 1]: Recall menu settings from
menu bank 1.
RECALL BANK 2 [> Recall 2] :Recall menu settings from
menu bank 2
RECALL BANK 3 [> Recall 3]: Recall menu settings from
menu bank 3.
SAVE BANK 1 [> Save 1]: Save current menu settings to
menu bank 1.
SAVE BANK 2 [> Save 2]: Save current menu settings to
menu bank 2.
SAVE BANK 3 [> Save 3]: Save current menu settings to
menu bank 3.
MENU GRADE [Menu grade]: Selection of menu items to
be displayed
Determine whether to display basic items only or both basic
and enhanced items in the monitor video section and the time
data display section when using the setup menu.

Setup Menu Operations

This section explains how to change menu settings.
Buttons used to change settings
Use the following buttons to change menu settings.
90
System Menu
Description
*NETWORK [>> Network]: Only when the switch is set to
"NETWORK".
NETWORK&RS-422A[>> Net&Rmt]: Only when the switch is
set to "NETWORK", or when the switch is set to
"REMOTE" and the menu item REMOTE I/F is set to
"9PIN/RS232".
DISABLE [>> DISABLE]: Disable.
*ENABLE [>> ENABLE]: Enable.
Description
0SEC [>> 0 sec] to 10SEC [>> 10 sec]: The frame at 0
seconds to 10 seconds from the top of the clip, specified in
units of 1 second.
Factory default setting: *0SEC
The STORED OWNERSHIP screen appears.
For details, see Appendix "Setting UMID ownership
information" on page 112.
OFF [>> OFF]: Do not include VANC packet information in
data items.
*ON [>> ON]: Include VANC packet information in data items.
Description
Operate with the following procedure.
(1) Select the bank you want to recall, then press the ,/OUT
button.
Message "RECALL OK?" appears.
(2) To recall, press the SET button.
To quit recalling, press the RESET button.
(3) To save the recalled bank, press the SET button once
again.
Operate with the following procedure.
(1) Select the bank you want to save, then press the ,/OUT
button.
Message "SAVE OK?" appears.
(2) To save, press the SET button.
To quit saving, press the RESET button.
Description
*BASIC [>> Basic]: Display basic items only.
ENHANCED [>> Enhanced]: Display both basic and
enhanced items.
Menu control buttons
MENU button
Functions
• Display and hide the menu.
• Return to the menu from
setting screens.