Sony PDW-F30 Operating Instructions Manual page 101

When a disc is inserted
Alarm message in time
data display section
Unknown FS!
No FS!
ILL. Disc!
Salvage NG!
a)
525/60 Clip
a)
625/50 Clip
a)
4CHx16 Clip
a)
2CHx16 Clip
No Support!
ILL. Index!
FORMAT NG!
DI read err
Read err
DRV ADJ err
a) Displayed only when DISPLAY CONTROL >ALARM is set to "ON" or
"LIMITED".
During front panel operations
Alarm message in time
data display section
a)
KEY INHI.!
a)
REMOTE!
a)
No Disc!
REC INHI.!
b)
No Clip!
Alarm message in monitor video
section
UNKNOWN FILE SYSTEM.
PLEASE FORMAT DISC OR EJECT.
NO FILE SYSTEM.PLEASE EJECT DISC. Eject the disc.
IRREGULAR DISC IS USED.
USE PROFESSIONAL DISC.
CLIP SALVAGE WAS NOT COMPLETED. See "Handling of Discs When Recording Does Not
IRREGULAR DISC IS USED. DVCAM
525/60 CLIP(S) EXIST.
IRREGULAR DISC IS USED. DVCAM
625/50 CLIP(S) EXIST.
DISC HAS 4CHx16 BIT CLIP(S).
CHANGE RECORD FORMAT IN SETUP
MENU.
DISC HAS 2CHx16 BIT CLIP(S).
CHANGE RECORD FORMAT IN SETUP
MENU.
FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
INDEX FILE ERROR.
PLEASE FORMAT DISC OR EJECT.
AUTO FORMATTING WAS NOT
COMPLETED.
CANNOT READ DISC
INFORMATION.PLEASE EJECT DISC.
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
Alarm message in monitor video
section
KEY INHIBIT MODE IS SELECTED.
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
NO DISC.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
NO CLIP.
Description/action
Format the disc, or eject it (see page 36).
Use a Professional Disc.
End Normally (Salvage Functions)" (page 36).
Use another disc.
Change the setting of AUDIO CONTROL >REC
MODE in the setup menu (see page 89).
Change the setting of AUDIO CONTROL >REC
MODE in the setup menu (see page 89).
A disc in an unsupported recording format is loaded.
Use a disc formatted in the MPEG HD or DVCAM
format.
Format the disc, or eject it (see page 36).
Eject the disc and insert it again, or insert another
disc.
Description/action
This appears when the KEY INH (SHIFT + DISPLAY)
button is on.
Turn the KEY INH button off.
Set the remote control switch to "LOCAL".
Insert a disc and try again.
Set the disc's Write Inhibit tab to enable recording
(see page 35).
This appears when a playback, search or delete
operation is attempted on a disc with no clips
recorded on it.
Insert a disc with clips recorded on it.
101
Troubleshooting