Sony PDW-F30 Operating Instructions Manual page 104

Alarm message in time
data display section
a)
ILL. REF!
a)
ILL. REC!
a)
ILL. PLAY!
a)
MEM. Full!
a)
MEM. Empty!
Recording
Drive Busy!
a) Displayed only when DISPLAY CONTROL >ALARM is set to "ON" or
"LIMITED".
104
Troubleshooting
Alarm message in monitor video
section
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO
SIGNAL.
USE COMMON REFERENCE SIGNAL
OR CONNECT RECORDER REF OUT TO
PLAYER REF IN.
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
ILLEGAL PLAYBACK.
MEMORY FULL !!
MEMORY EMPTY !!
NOW RECORDING ...
PREVIOUS CLIP HAS NOT BEEN
RECORDED ON TO THE DISC
YET.STOP RECORDING AND WAIT TILL
THE ACCESS LED TURN OFF.
Description/action
Input a reference signal synchronized with this unit's
system frequency.
Check the signals being input to this unit.
Check the disc being played by this unit.
Check the disc being recorded by this unit.
Wait for recording to finish.
This appears when a clip has been saved to this unit's
temporary memory but recording to the disc has not
been completed. Wait until recording to the disc
finishes (until the access LED turns off).