Sony PDW-F30 Operating Instructions Manual page 88

VIDEO CONTROL [Video]: Settings related to video
control
WIDE MODE [> Wide
mode]: For SD
output, specify
whether to play back
with the addition of
wide picture
information.
FRAME PB [> Frame PB]: Select whether to output fields or
frames as still images of video.
PROCESS CONTROL
[> Proc ctrl]:
Separate adjustment
screens appear for
the following items.
Use the jog dial to
make settings, and
press the MENU
button to return from
the adjustment
screens to the
second level of the
setup menu.
UP CONVERT [> UP
convert]: Specify
upconvert output.
DOWN CONVERTER [>
Down conv]: Set up
the down converter.
88
System Menu
OUTPUT [>> Output]
VIDEO GAIN [>> V gain]: Adjust
the video output level.
CHROMA GAIN [>> C gain]:
Adjust the chroma output level
CHROMA PHASE [>> C phase]:
Adjust the chroma phase.
SETUP LEVEL [>> Setup lev]:
Adjust setup level.
AUTO SQEEZE [>> Auto SQZ]:
Select whether to use auto
squeeze mode.
CONV MODE [>> Conv mode]:
Select the conversion mode.
DETAIL GAIN [>> Detail]: Select
the gain level of the up
converter image enhancer.
CONV MODE [>> Conv mode]:
Select the conversion mode.
Note
"SQEEZE" (squeeze mode) is
selected automatically during
recording.
DETAIL GAIN [>> Detail]: Select
the gain level of the down
converter image enhancer.
CROSS COLOR [>> Cross col]:
Turn cross color adjustment
on or off.
Description
*AUTO [>>> Auto]: When DOWN CONVERT >CONV MODE
in the setup menu is set to "SQUEEZE", automatically add
wide picture information when playing back MPEG HD-
format video. When playing back DVCAM-format video,
automatically add wide picture information if wide picture
information is detected on the disc.
OFF [>>> OFF]: Do not add wide picture information.
ON [>>> ON]: Always add wide picture information.
Notes
• To add wide picture information to the output signal, it is
necessary, in addition to setting this item, to set line 20 (when
the system frequency is 60I, 30P) or line 23 (when the system
frequency is 50I, 25P) to "THROUGH" in the VIDEO
CONTROL >BLANK LINE item of the setup menu.
• When the system frequency is 60I or 30P, it may not be
possible to completely output wide picture information if the
VITC insertion position has been set to "20LINE" with the
setup menu items TIME CODE >VITC POS SEL-1/2.
*AUTO [>> AUTO]: Output a field image when the format is
interlaced, and output a frame image when the format is
progressive.
FRAME[>> FRAME]: Always output a frame image.
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–128 [>>> –128] to 127 [>>> 127]
Factory default setting: *0 [>>> 0]
–272 [>>> –272] to 271 [>>> 271]
Factory default setting: *0 [>>> 0]
*OFF [>>> OFF]: Do not use.
ON [>>> ON]: Use.
*EDGE CROP [>>> Edge Crop]: Edge crop mode
LETER BOX [>>> LetterBox]: Letter box mode
SQEEZE [>>> Squeeze]: Squeeze mode
*LOW [>>> Low]: Low
MID [>>> Mid]: Mid
HIGH [>>> High]: High
*EDGE CROP [>> Edge Crop]: Edge crop mode
LETER BOX [>> LetterBox]: Letter box mode
SQEEZE [>> Squeeze]: Squeeze mode
OFF [>> Off]: Off
*LOW [>> Low]: Low
MID [>> Mid]: Mid
HIGH [>> High]: High
*OFF [>>> OFF]: The image enhancer uses default settings for
cross color.
ON [>>> ON]: The image enhancer adjusts so that there are
fewer cross colors.