Using Pdz-1 Over An I.link Connection (Fam Connection) - Sony PDW-F30 Operating Instructions Manual

COMPOSITE OUT AUDIO MONITOR
R
AUDIO OUTPUT
1/3 2/4
MONITOR
MEU-WX2 Multi-Format Engine
LMD-172W/232W Multi-Format LCD Monitor
Connection method and connection cables
Connection method
Component (Y/P /P ) D-Sub 15-pin – analog component
B R
To view SD video
Connect an SD video monitor using the method in the
following figure.
24
Connections and Settings
AUDIO
PDW-F30 (this unit)
MONITOR
-
AC IN
L
POWER
RS232C REMOTE(9P)
S400
MONITOR
Y/P /P
B R
connectors AUDIO IN
connector
Connection cables (not supplied)
cable, phono plug – stereo miniplug
cable
COMPOSITE AUDIO
OUT MONITOR
COMPOSITE OUT AUDIO MONITOR
R L
AUDIO OUTPUT
1/3 2/4
MONITOR
COMPOSITE
IN connector
MEU-WX2 Multi-Format Engine
LMD-172W/232W Multi-Format LCD Monitor
Connection method and connection cables
Connection method Connection cables (not supplied)
Composite 75Ω coaxial cable, phono plug –
stereo miniplug cable
Using PDZ-1 Over an i.LINK
Connection (FAM Connection)
You can use the supplied PDZ-1 Proxy Browsing Software
to do simple editing of proxy AV data. The following
explains how to make an i.LINK connection between this
unit and a computer with PDZ-1 installed, and how to
access this unit by FAM (file access mode).
Notes
• The required FAM driver is also installed when you
install the PDZ-1 software.
• Use version 2.01 or higher of the FAM driver.
• This unit's S400 connector has 6 pins. Check the
number of pins on the i.LINK connector of your
PDW-F30 (this unit)
-
AC IN
POWER
RS232C REMOTE(9P)
S400
AUDIO IN
connector