Specifications - Sony PDW-F30 Operating Instructions Manual

About data transfer speed of i.LINK
i.LINK defines maximum data transfer speeds of
approximately 100, 200 and 400 Mbps
to as S100, S200 and S400 respectively.
The maximum data transfer speed that an i.LINK device
supports is identified on the specifications page of the
operating instructions supplied with the device or near its
i.LINK connector.
When you connect a device that supports different data
transfer speeds, the actual data transfer speeds may be
different from those indicated on the i.LINK connectors.
1) What is Mbps?
Megabits per second. A measure of the rate at which data
is transmitted per second. In case of 100 Mbps, 100
Megabits of data can be transmitted per second.
i.LINK operation with this unit
For details on operation when other equipment with an
i.LINK (DV) connector is connected, see Chapter 2 (page
22).
For details on connection with an i.LINK cable and the
necessary software, refer to the operating instructions
supplied with the connected device.
Use Sony i.LINK cables
Use Sony i.LINK cables to connect the i.LINK devices.
6 pins y 4 pins (For DV dubbing)
6 pins y 6 pins (For DV dubbing)
i.LINK and are trademarks.
108

Specifications

Specifications
1)
that are referred
General
External dimensions (w/h/d, excluding projections)
Mass
Power requirements
Power consumption
Peak inrush current
Operating temperature
Storage and transport temperature
Operating relative humidity (no condensation allowed)
Storage and transport relative humidity (no condensation
allowed)
System
Recording format
Video
Proxy video
Audio
Proxy audio
307 × 100 × 411 mm
1 1
(12 / × 4 × 16 / inches)
8 4
307(12 / )
1
in mm (inches)
8
7.2 kg (15 lb 13 oz)
100 V to 240 V AC, 50/60 Hz
0.79-0.33 A
(1) Power ON, current probe method:
45 A (240 V), 15 A (100 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 7 A
(230 V)
5ºC to 40ºC (41ºF to 104ºF)
–20ºC to +60ºC (–4ºF to +140ºF)
25% to 80% (RH)
20% to 90%
MPEG HD: HQ35/SP25/LP18 Mbps
1)
MPEG-4
MPEG HD: 16 bits, 48 kHz, 4/2 channels
A-law 8 bits, 8 kHz, 4 channels