Mounting The Programming Unit Of The Control Unit - Viessmann Vitodens 200 WB2 Installation Instructions Manual

Mounting the programming unit of the control unit

1.
7.
5.
Start-up and adjustments
5862130G - page 15 (Black)
Screen angle and frequency: 45.0000, <default>
2.
4.
3.
6.
Control unit/Appendix
Please note:
The control unit is packed separately.
1. Position the control unit case in
the guideways on the side and
push back.
Please note:
When this is done, the electrical
connection of the control unit
components takes place automati
cally.
Do not kink the capillaries of the
manometer.
2. Lock the catches on the side.
3. Screw on the guard panel.
4. If necessary, break off the tabs.
5. A sticker containing an overview of
the user controls is supplied with
the control unit. Affix the sticker
from inside to the hinged cover on
the front panel.
6. Hook on the front panel.
7. Lock the turnlock fastener.
See service instructions for
details of start-up and ad
justments.
15