Table of Contents
Advertisement
B
1.
For best performance, electrical bond between aircraft and antenna should be less than 10
milliohms measured from TNC connector to aircraft skin.
2.
Antenna to be mounted with four 8-32 x 3/4 inch long Pan Head phillips stainless steel
screws (Honeywell P/N 089-05909-0012).
3.
Serial tags to be vendor supplied in accordance with Honeywell P/N 057-05753-0000 and
Comant P/N B40585-1.
4.
Airspeed Rating: 600 knots TAS maximum.
5.
Antenna to be installed with installation kit Honeywell part number 050-03318-0000.
6.
Antennas to be bulk packaged as per good commercial practice.
7.
Finished antenna assembly to be tested utilizing Honeywell Test Chamber 190-2361-XX or
equivalent, and CHU Associates source antenna model CA3224, or Tecom Model
401163-2.
Rev. 4, Jan/2003
NOTES
FIGURE 2-9 KA 92 OUTLINE
Dwg. No. 071-01553-0200 Rev. AB
Sheet 3 of 3
10599I04.CDL
KLN 94
Page 2-25
Hide quick links:
Advertisement
Table of Contents
