BENDIXKing KLN 94 Installation Manual page 141

B
KLN 94
If the aircraft is equipped with a Bendix/King KLN 89B GPS receiver, the KLN 89B unit can be
removed and a KLN 94 unit installed. No changes to the existing mounting rack or electrical
harness are required. However, if the KLN 89B is configured only for IFR Enroute operations, the
KLN 94 must be configured the same way.
The KLN 94 also has additional features, such as QuickTune™, which may be added. When the
KLN 94 additional features are utilized in existing KLN 89B installations, wiring harness changes
will be necessary. See the KLN 94 wiring diagrams in this book.
Once the KLN 94 has been installed, a post installation checkout procedure must be performed.
Also see the KLN 89B / KLN 94 substitution letter following this page.
Rev. 4, Jan/2003 10599I04.CDL Page D-3