BENDIXKing KLN 94 Installation Manual page 102

B
Item Data
Designator Format
B s ddd mmhh
C ddd
D ddd
E ddddd
G sdddd
I dddd
(INDIA)
K ddddd
L dddd
Q sddd
T ---A-----
l dddddd
(lima)
u free fromat
w ddsiiiiilllLLLLmm
Rev. 4, Jan/2003
STANDARD RS232
Data Field
Width
10 present longitude; dash if position flag is set
s=sign: E for East, W for West
ddd=degrees
mm=minutes
hh=hundreths of minutes
3 magnetic track, degrees; dash if GS is set
3 groundspeed, knots; dash if position flag is set
5 10 x distance to active waypoint, nm; dash if
Nav Flag is set
5 crosstrack error; dash if Nav Flag is set
s=sign: R for aircraft position right of course, L
for aircraft position left of course.
dddd=1000 x crosstrack error, nm
4 10 x magnetic desired track, degrees (use
selected course in OBS mode); dash if Nav Flag
is set.
5 active waypoint identifier
4 10 x magnetic bearing to active waypoint,
degrees (use radial from active waypoint 180 in
OBS mode); dash if Position Flag is set.
4 magnetic variation; dash if Position Flag is set
s=sign: E for East, W for West
add=10 magnetic variation, degrees
warnings; 4th character is "A" if estimated
position error exceeds 3.8nm, otherwise "-"
6 10 x distance to destination, nm; dash if Nav
Flag is set
for development testing only
17 flight plan waypoint data; this item is sent for
each waypoint in the active flight plan
dd=waypoint number (01-25)
s=sequence number bits: 76543210
xlannnnn
x=unused, l=1 is last waypoint, a=1 if active wpt
nnnnn=sequential number, unassigned binary
iiiii=identifier
10599I04.CDL
Description
Page A-12
KLN 94