Table of Contents
Advertisement
B
OBS COS:
A/C POWER MONITOR:
CONFIGURATION MODULE:
OBI SYNC, OBI CLOCK, & OBI DATA:
DATA LOADER/QUICKTUNETM RS 232 OUT:
GENERAL RS 232 OUT:
GPS SENSOR RS 232 OUT:
WAYPOINT ANNUNCIATE:
MESSAGE ANNUNCIATE:
APPROACH ACTIVE ANNUNCIATE:
APPROACH ARM ANNUNCIATE:
SPARE ANNUNCIATE 1:
SPARE ANNUNCIATE 2:
ROLL STEERING VALID
N/A on -0101
ROLL STEERING HI
N/A on -0101
Rev. 4, Jan/2003
OBS resolver cosine. Nominal input impedance
is 33.8 K ohms (AC) and 100 K ohms (DC).
This pin senses the aircraft power bus voltage.
This high impedance input operates from 0 to
33 V with accuracy of 0.1 V.
Refer to
Section 2.3.6.2
SIGNAL OUTPUTS:
Honeywell Serial Data containing bearing to
the active waypoint.
The Data Loader/QuickTune RS 232 output is
designed to communicate with an IBM
compatible personal computer.
The RS 232 output is designed to interface with
certain ARNAV ELTs and certain moving map
displays, and Shadin fuel flow systems (refer to
RS 232 Format Definitions
The GPS Sensor RS 232 output is a buffered
connection to the GPS sensor (Xpress)
transmitter connection to the host processor. It
is designed to interface with a EGPWS, and for
testing.
OPEN = Inactive
LOW = Active (Output can sink up to 250 mA)
OPEN = Inactive
LOW = Active (Output can sink up to 250 mA)
OPEN = Inactive
LOW = Active (Output can sink up to 250 mA)
OPEN = Inactive
LOW = Active (Output can sink up to 250 mA)
Spare annunciators are reserved for future
use.
Spare annunciators are reserved for future
use.
≥
Valid =
18 V in 28 VDC installations;
14 VDC installations. Invalid =
installations while sinking 1 mA. Output can
source at least 250 mA.
Output Range: 550mV per degree of Bank.
10599I04.CDL
Appendix).
≤
3.5 V in all
2V per degree per second of
Turn Rate.
Page 1-3
KLN 94
≥
10 V in
Hide quick links:
Advertisement
Table of Contents
