Preparation; Coolant And Lubricants (Rops And Cabin Model) - Kubota L3540 Workshop Manual

L3540, L4240, L5040, L5240, L5740, WSM

5. PREPARATION

[1] COOLANT AND LUBRICANTS (ROPS AND CABIN MODEL)

Draining Engine Oil
CAUTION
• Be sure to stop the engine before changing the oil.
• Allow engine to cool down sufficiently, oil can be hot and
can burn.
1. To drain the used oil, remove the drain plug (3) at the bottom of
the engine and drain the oil completely into the oil pan.
All the used oil can be drained out easily when the engine is still
warm.
2. After draining reinstall the drain plug (3).
3. Fill with the new oil up to the upper notch on the dipstick (2).
IMPORTANT
• Refer to "4. LUBRICANTS, FUEL AND COOLANT" at "G.
GENERAL" section.
L3540 (D1803-M-E2)
Engine oil capacity
L4240 (V2203-M-E2)
(with filter)
L5040 (V2403-M-TE3)
L5240 (V2403-M-TE3)
L5740 (V2403-M-TE3)
(1) Oil Inlet
(2) Dipstick
(3) Drain Plug
1-S22
ENGINE
6.7 L
7.1 U.S.qts
5.9 Imp.qts
8.2 L
8.7 U.S.qts
7.2 Imp.qts
9.4 L
9.9 U.S.qts
8.3 Imp.qts
[A] L4240
[B] L3540, L5040, L5240, L5740
A : Oil level is acceptable within this
range.
W1036028
KiSC issued 04, 2010 A