Apply A Generous Amount Of The Included Grease - Pro-Form PFEL03815.2 User Manual

7. Have a second person hold the Pivot Bracket (3)
near the Upright (2).
Locate the wire tie in the Pivot Bracket (3). Tie
the wire tie to the Upper Wire (94) and then pull
the other end of the wire tie until the Upper Wire
is routed through the Pivot Bracket.
8. Using a plastic bag to keep your fingers clean,

apply a generous amount of the included grease

to the Pivot Axle (80).
Tip: Avoid pinching the Upper Wire (94). Slide
the Pivot Bracket (3) onto the Upright (2) and
hold it in place.
Next, insert the Pivot Axle (80) into the Pivot
Bracket (3) and into the Upright (2). Center the
Pivot Axle.
Then, tighten the Pivot Knob (13) into the Pivot
Bracket (3).
7
94
2
8
94
2
13
10
Wire Tie
3
Wire Tie
Avoid
pinching
the Upper
Wire (94)
3
80
Grease