Text Box
Virtual Machine
Version
Memory
5.
Select Perform initial ad-hoc export to perform the virtual export immediately instead of after the
next scheduled snapshot.
6.
Click Next.
7.
On the Volumes page, select the volumes to export, for example, C:\ and D:\, click Next.
8.
On the Summary page, click Finish to complete the wizard and to start the export.
NOTE: You can monitor the status and progress of the export by viewing the Virtual Standby or
Events tab.
Exporting Windows data using Hyper-V export
In AppAssure, you can choose to export data using Hyper-V Export by performing a one-time or
continuous export. Complete the steps in the following procedures to export using Hyper-V Export for
the appropriate type of export.
Performing a one-time Hyper-V export
To perform a one-time Hyper-V export:
1.
In the Core Console, navigate to the machine you want to export.
2.
On the Summary tab, click Actions → Export → One-time.
The Export Wizard displays on the Protected Machines page.
3.
Select a machine for export, and then click Next.
4.
On the Recovery Points page, select the recovery point that you want to export, and then click Next.
64
Description
Enter a name for the virtual machine being created; for example,
VM-0A1B2C3D4.
NOTE: The default name is the name of the source machine.
Specify the version of VMware Workstation for the virtual machine. You can
choose from:
•
VMware Workstation 7.0
•
VMware Workstation 8.0
•
VMware Workstation 9.0
Specify the memory for the virtual machine by clicking one of the following:
•
Use the same amount of RAM as the source machine - To specify that the
RAM configuration is the same as the source machine.
•
Use a specific amount of RAM - To specify how much RAM to use; for
example, 4096 Megabytes (MB). The minimum amount allowed is 512 MB
and the maximum is determined by the capability and limitations of the
host machine.