Table of Contents
Advertisement
Text Box
Transfer Data
Server Port
Transfer Timeout
Snapshot Timeout Specifies in minutes and seconds the maximum time to wait to take a
Network Read
Timeout
Network Write
Timeout
5.
Click OK.
Archiving data
Retention policies enforce the periods for which backups are stored on short-term (fast and expensive)
media. Sometimes certain business and technical requirements mandate extended retention of these
backups, but use of fast storage is cost prohibitive. Therefore, this requirement creates a need for long-
term (slow and cheap) storage. Businesses often use long-term storage for archiving both compliance
and noncompliance data. The archive feature in AppAssure is used to support the extended retention for
compliance and noncompliance data. It is also used to seed replication data to a remote replica core.
Creating an archive
To create an archive:
1.
In the Core Console, click Tools → Archive → Create.
The Add Archive Wizard dialog box appears.
2.
On the Create page of the Add Archive Wizard, select one of the following options from the
Location Type drop-down list:
•
Local
•
Network
•
Cloud
3.
Enter the details for the archive as described in the following table based on the location type you
selected in Step 3.
Description
•
SQLServerWriter
•
System Writer
•
Task Scheduler Writer
•
VSS Metadata Store Writer
•
WMI Writer
Sets the port for transfers. The default setting is 8009.
Specifies in minutes and seconds the amount of time to allow a packet to be
static without transfer.
snapshot.
Specifies in minutes and seconds the maximum time to wait for a read
connection. If the network read is not performed in that time, the operation is
repeated.
Specifies the maximum time in seconds to wait for a write connection. If the
network write is not performed in that time, the operation is repeated.
43
Advertisement
Table of Contents
