Table of Contents
Advertisement
Text Box
Memory
3.
Click Next.
4.
On the Summary page, click Finish to complete the wizard and start the export.
NOTE: You can monitor the status and progress of the export by viewing the Virtual Standby or
Events tab.
Performing a continuous (virtual standby) VMware workstation export
To perform a continuous (virtual standby) VMware Workstation export:
1.
In the Core Console, perform one of the following:
•
On the Virtual Standby tab, click Add to launch the Export Wizard. On the Protected Machines
page of the Export Wizard, select the protected machine you want to export, and then click
Next.
•
Navigate to the machine you want to export, and, on the Summary tab in the Actions drop-down
menu for that machine, click Export → Virtual Standby.
2.
On the Destination page of the Export Wizard, click Recover to a Virtual Machine → VMware
Workstation .
3.
Click Next.
4.
On the Virtual Machine Options page, enter the parameters for accessing the virtual machine as
described in the following table.
Text Box
Target Path
User Name
Password
Description
Specify the memory usage for the virtual machine by clicking one of the
following:
•
Use the same amount of RAM as the source machine - To specify that the
RAM configuration is the same as the source machine.
•
Use a specific amount of RAM - To specify how much RAM to use; for
example, 4096 Megabytes (MB). The minimum amount allowed is 512 MB
and the maximum is determined by the capability and limitations of the
host machine. (recommended)
Description
Specify the path of the local folder or network share on which to create the
virtual machine.
NOTE: If you specified a network share path, enter a valid logon
credentials for an account that is registered on the target machine. The
account must have read and write permissions to the network share.
Enter the logon credentials for the virtual machine.
•
If you specified a network share path, you must enter a valid user name for
an account that is registered on the target machine.
•
If you entered a local path, a user name is not required.
Enter the logon credentials for the virtual machine.
•
If you specified a network share path, you must enter a valid password for
an account that is registered on the target machine.
•
If you entered a local path, a password is not required.
63
Advertisement
Table of Contents
