Dell DL1000 User Manual page 60

Performing a one-time ESXi export
To perform a one-time ESXi export:
1. In the Core Console, navigate to the machine you want to export.
2. On the Summary tab, click Actions → Export → One-time.
The Export Wizard displays on the Protected Machines page.
3. Select a machine for export for export and then click Next.
4. On the Recovery Points page, select the recovery point that you want to export, and then click Next.
Defining virtual machine information for performing an ESXi export
To define virtual machine information for performing an ESXi export:
1. On the Destination page in the Export Wizard, in the Recover to Virtual machine drop-down menu,
select ESX(i).
2. Enter the parameters for accessing the virtual machine described as follows:
Text Box
Host name
Port
User name
Password
3. On the Virtual Machine Options page, enter the information described in the following table.
Text Box
Resource Pool
Data Store
Virtual Machine
Name
Memory
Disk Provisioning
Disk Mapping
Version
4. Click Next.
5. On the Volumes page, select the volumes you want to export, and then click Next.
6. On the Summary page, click Finish to complete the wizard and start the export.
NOTE: You can monitor the status and progress of the export by viewing the Virtual Standby or
Events tab.
Performing a continuous (virtual standby) ESXi export
To perform a continuous (virtual standby) ESXi export:
1. In the Core Console, perform one of the following:
60
Description
Enter a name for the host machine.
Enter the port for the host machine. The default port is 443.
Enter the logon credentials for the host machine.
Enter the logon credentials for the host machine.
Description
Select a resource pool from the drop-down list.
Select a data store from the drop-down list.
Enter a name for the Virtual Machine.
Specify the memory usage.
Select the type of disk provisioning as either Thin or Thick.
Specify the type of disk mapping as either Automatic or Manual.
Select the version of the virtual machine.