HP ENVY Maintenance And Service Manual page 66

5. Disconnect the six cables from the connectors that the speaker cable is routed under (2).
For proper cable routing, see
6. Remove the two broadhead Phillips PM2.0×2.0 screws (3) that secure the speaker to the computer.
NOTE:
performance of the speakers.
NOTE:
7. Remove the speaker cable from its routing path (6).
8. Remove the speaker (7).
Reverse this procedure to install the speakers.
58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Cable routing on page 59
The speaker includes rubber isolators (4) around the screws. These isolators are crucial to the
Note the way the speaker cable is routed near the RTC battery (5).
.