Usb Board - HP ENVY Maintenance And Service Manual

USB board

Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
Remove the USB board:
1. Disconnect the cable (1) from the USB board.
2. Remove the Phillips PM2.5×5.0 screws (2) that secure the USB board to the computer.
48 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 35).
Spare part number
812695-001
812679-001