Table of Contents
Advertisement
5. Draw the servo extension through the wing and
pull through the wing root rib.
Note: Taping servo lead to the inside of the wing
panel will help to prevent lead from dropping back
inside of wing panel
during transportation
6. Install servo in servo well with the output arm
toward the leading edge of the wing. Mark and
drill location of servo mounting holes.
7. Install servo with servo mounting screws.
Pushrod / Control Horn Installation
1. Gather the aileron control linkage parts as
shown below.
◊
1 - 3" pushrod
◊
2 - 4-40 ball link assemblies
◊
1 - Brass spacer
◊
1 - Flat washer
◊
2 - Lock nuts
◊
1 - Left control horns
◊
1 - Right control horns
◊
6 - Wood screws
◊
1 - Adjustment wrench-Not Pictured
18
Hide quick links:
Advertisement
Table of Contents
