Heater Unit / Installation Kit
Amount
Description
1
Commercial supply of required control
1
Installation kit for Audi A4 1.9 + 2.0 TDI Diesel
Recommended heater unit for the relevant vehicle class:
Vehicle
Compact car
Mid-class, station wagon
Luxury, van, off-roader
Select the heater unit based on the size of the vehicle passenger compartment and the customer's
comfort requirements.
Foreword
These installation instructions apply to vehicles Audi A4 1.9 + 2.0 TDI with Diesel engines.
– Re. validity, see page 2 – from model year 2006 and later, assuming technical modifications to the
vehicle do not affect installation, any liability claims excluded. Depending on the vehicle version and
equipment, modifications may be necessary during installation with respect to these installation
instructions.
However, the stipulations in the "installation instructions" and "operating and maintenance instructions"
for the Thermo Top C/P/E are to be observed in any event.
The corresponding rules of technology and any information from the vehicle manufacturer should be
observed during the installation work.
General Instructions
Installation should be carried out according to the general, standard rules of technology. Unless
specified otherwise, fasten hoses, lines and cable harnesses to original vehicle lines and cable
harnesses using cable clips.
Sharp edges should be fitted with edge protectors (split open plastic hose).
Spray unfinished body areas, such as for example bore holes, with anti-corrosion wax (Tectyl 100K,
Order No. 111329)!
Special Tools
- Torque spanner for 2.0 - 10 Nm
- Vise-grip wrench
- Riveting nut tool
Audi A4 1.9 + 2.0 TDI
See price list
Thermo Top E
Thermo Top C
Thermo Top P
Order no.:
9015441A
Heater unit
3 3