Optical Drive - HP Pavilion Star Wars Maintenance And Service Manual

Optical drive

Description
DVD+/-RW Double-Layer SuperMulti Drive
For use in silver models
For use in white models
For use in red models
For use in blue models
For use in pink models
For use in purple models
For use in black models
For use in Star Wars Special Edition models
Blu-ray Disc R/RW with SuperMulti Drive
For use in silver models
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
To remove the optical drive:
1. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
2. Remove the optical drive (2) by sliding it out of the optical drive bay.
Reverse this procedure to reassemble and install the optical drive.
Battery on page 40).
Spare part number
809328-001
809329-001
809330-001
809331-001
809332-001
809333-001
812889-001
833469-001
809334-001
Component replacement procedures 41