HP Pavilion Star Wars Maintenance And Service Manual page 66

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the heat sink assembly:
1. Position the system board upside down.
2. If you have a model with UMA graphics, in the order indicated, remove the four Phillips PM2.0×3.0
screws (1) – (4) that secure the heat sink to the system board.
NOTE:
3. Remove the heat sink (5) from the system board.
● Discrete graphics: Thermal paste is used on the processor and associated heat sink area (1)(2), as well
as the graphics chip and associated heat sink area (3)(4).
58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Optical drive on page
Bottom cover on page
The heat sink on models with discrete graphics have two additional screws.
40).
41).
44).