Power Button Board - HP Pavilion Star Wars Maintenance And Service Manual

Power button board

Description
Power button board (includes cable)
Power button board for use in Star Wars Special Edition models (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the system board (see
To remove the power button board:
1. Remove the Phillips PM2.5×5.0 screw (1) from the left hinge.
2. Rotate the left hinge upward (2).
3. Remove the Phillips PM2.0×2.5 screw (3) that secures the power button board to the computer.
Battery on page 40).
Optical drive on page
Bottom cover on page
System board on page
41).
44).
62).
Component replacement procedures
Spare part number
809033-001
837611-001
67