Table of Contents
Advertisement
6. Select Select Reference Paper and press the right arrow button.
7. Select a paper preset that is similar to the paper that you loaded and press the OK button.
Note: Use the following guidelines when selecting the reference paper that is closest to the paper
you are using:
• Glossy paper: Photo Paper or Proofing Paper.
• Thick paper that isn't glossy: Matte Paper.
• Thin, soft paper that isn't glossy: Plain Paper.
• Cotton paper with a rough surface: Fine Art Paper.
• Special media such as film, cloth, poster board, or tracing paper: Others.
8. Select Platen Gap and press the right arrow button.
9. Select a platen gap setting and press the OK button.
10. Select Detect Paper Thickness and press the right arrow button.
11. Press the OK button.
A paper thickness pattern prints.
12. Check the printed pattern and locate the pattern with the most evenly overlapping lines.
13. Select the number of the most even pattern and press the OK button.
14. Select any additional settings in the Custom Paper Settings menu, as necessary.
15. When you finish changing the paper configuration settings, press
menu.
After you create paper configurations, you can print a list of the presets and the settings for each one.
Note: You can also use the LFP Remote Panel Utility software to create custom paper configurations.
Printing a Paper Configuration List
57
pause/cancel to exit the
Advertisement
Table of Contents
