Table of Contents
Advertisement
Maintenance
See the instructions in these sections to maintain your printer for optimum results.
Cleaning Your Product
Replacing the Cutter
Cleaning Your Product
To keep your product working at its best, you should clean it regularly (about once a month).
Note: Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you may
damage it. Do not use oil or other lubricants inside the product or let water get inside.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove any paper from the product.
5. Open the front cover and carefully clean the inside of the product with a soft, clean cloth.
169
Advertisement
Table of Contents
